Chimney removal
Chimney breast removal
£1,500 to £3,000 is the typical price to remove a ground-floor chimney breast. Removing the breast on two floors costs £2,200 to £4,000, and taking out the breast and the stack together costs £2,500 to £5,500.
Post your chimney and stove job to Premium membersTell us about your job once. Premium chimney sweeps who cover your area can then contact you.Describe your job
What this covers
What it costs. Removing a ground-floor chimney breast typically costs £1,500 to £3,000. Full cost breakdown.
What the job covers
- Removing a chimney breast from one or more rooms
- Fitting steel beams or supports for the stack above
- Making good the walls, ceiling and floor
- Capping and ventilating the flue where the stack stays
- Working with a structural engineer and building control
What is involved
A chimney breast is the part of the wall that sticks out into the room around the fireplace. Taking it out opens up the room, but it is structural work. If the stack above is to stay, it must be held up by a steel beam or support. Because of this, a structural engineer is likely to be involved, and building regulations approval is likely to be needed.
Before any work starts, a gas fire should be disconnected by a Gas Safe registered engineer, and the flue capped. If the chimney is shared with a neighbour, a party wall notice may be needed. Published guides put the cost of a structural engineer at £250 to £700 and building regulations approval at £200 to £600.
The work creates a lot of rubble and dust. The builder will usually put down protection, take out the breast brick by brick and remove the waste. Making good the walls, ceiling and floor afterwards is a separate job and may or may not be in the quote. Removing a breast in a loft or upstairs room is a smaller job than one on the ground floor, but the support above still has to be right.
Choosing someone for the job
Ask whether a structural engineer has been involved, and who applies for building regulations approval. Ask whether the price covers support for the stack above, skip hire, scaffolding and making good. Ask how the flue will be capped and ventilated. Check whether the party wall notice is needed.
Related jobs:
Common questions
Do I need building regulations approval to remove a chimney breast?
Often, yes. The work affects the structure, so building control is likely to be involved. Your builder or a structural engineer will tell you what is needed. Ask who will apply and who will pay the fee.
Do I need a structural engineer?
Usually, yes, especially where the stack above is to stay. The engineer calculates what support is needed. Published guides put the fee at £250 to £700.
Can I remove only the breast and leave the stack?
Yes, but the stack then needs support, usually a steel beam. That adds cost, and a structural engineer should specify it. Removing the stack as well costs more but avoids the support.
What happens to the flue?
If the stack stays, the flue is capped and ventilated. The builder will explain how. If the chimney is shared with a neighbour, the shared flue must be dealt with correctly.
How much does chimney breast removal cost?
£1,500 to £3,000 for a ground-floor breast, £2,200 to £4,000 for ground and first floors, and £2,500 to £5,500 for the whole breast and stack.
What fees come on top?
A structural engineer costs £250 to £700 and building regulations approval £200 to £600. A party wall notice may be needed if the chimney is shared. Ask whether these are in the quote.