chimneysweep.tradePost a job

Stoves and log burners

Log burner installation and wood burner installers

£1,900 to £3,500 is the typical price to fit a log burner, including the stove, in a home with a usable chimney. The wider range runs from £1,800 to £5,500 once the flue, hearth and extra work are included. A home with no chimney needs a twin-wall flue, which adds £1,500 to £3,500.

Post your chimney and stove job to Premium membersTell us about your job once. Premium chimney sweeps who cover your area can then contact you.Describe your job

Drawing of a log burner on its hearth with the flue pipe rising above it

What this covers

What it costs. Where the home has a usable chimney, fitting a log burner typically costs £1,900 to £3,500 including the stove. Full cost breakdown.

What the job covers

  • Fitting a log burner or wood burner into an existing chimney
  • Installing a flue liner
  • Building a twin-wall flue where there is no chimney
  • Fitting a hearth and checking clearances to walls
  • Notifying building control and issuing the certificate of compliance

Worth knowing

England and Wales

HETAS says most solid fuel installation work is notifiable to the local authority. An installer registered with HETAS for the relevant work can self-certify it through HETAS instead of the customer applying for a Building Notice. The customer then receives a HETAS Certificate of Compliance (Building Regulation Compliance Certificate) by post after the installer notifies the installation online. HETAS also says the notified information is needed for household insurance and the future sale of a property.

HETAS, Regulations (consumer guidance), hetas.co.uk/consumer/regulations

What is involved

A log burner installation is more than putting a stove in a fireplace. The installer checks the chimney, fits a flue liner if one is needed, sets the stove on a hearth and connects the flue. The work then has to be signed off. In England and Wales, HETAS says most solid fuel installation work is notifiable to the local authority. Approved Document J is the guidance that covers air supply, discharging fumes and protecting the building.

There are two ways to get the sign-off. A HETAS-registered installer can self-certify the work through HETAS. You then receive a HETAS Certificate of Compliance (Building Regulation Compliance Certificate) by post after the installer notifies the installation online. The other way is to apply to your local council's building control, who inspect the work and charge a fee. Published guides put that fee at about £200 to £530. Keep the certificate, because HETAS says the information is needed for household insurance and for selling the property.

The flue liner is often the biggest decision. A flexible stainless steel liner runs down an existing chimney and protects the brickwork from the heat and fumes. Fitted prices run from £800 to £2,000. A home with no chimney needs a twin-wall insulated flue system, at £1,500 to £3,500. A chimney that has not been used for years should be swept and looked at first, and a smoke test or camera survey will show whether the flue is sound.

The hearth, the stove and the room matter too. A stove needs a hearth that meets the rules for size and material, and the installer will set it away from combustible walls and furniture. Stoves with an output above 5kW usually need a permanent air vent. A carbon monoxide alarm should be fitted in the same room. Alarms cost £15 to £50, and the rules on alarms differ across the UK.

Stoves in a smoke control area need extra thought. In England, the rules make it an offence to release smoke from a chimney in a smoke control area, and you may only burn authorised fuels unless the stove is a Defra-approved (exempt) appliance. Such an appliance can burn unauthorised fuels such as wood. Your council can tell you whether you live in a smoke control area. Ask the installer whether the stove you want is Ecodesign rated and Defra approved before you buy it.

Choosing someone for the job

Ask whether the installer is registered with HETAS for solid fuel, and look them up on the HETAS register. Ask who will notify building control and when you will receive the certificate of compliance. Ask for the flue liner, hearth, air vent and carbon monoxide alarm to be priced as separate lines. Check whether scaffolding, the stove itself and the removal of the old fire are included. Ask what the installer will do if they find the chimney is not suitable once the work starts.

Worth reading first:

Related jobs:

Common questions

Do I need a HETAS-registered installer?

In England and Wales, HETAS says most solid fuel installation work is notifiable to the local authority. A HETAS-registered installer can self-certify the work through HETAS. The other route is to have your local council's building control inspect it, which carries a fee.

What is the certificate of compliance?

It is the HETAS Certificate of Compliance (Building Regulation Compliance Certificate). You receive it by post after the installer notifies the installation online. Keep it, because the notified information is needed for household insurance and the sale of a property.

Do I need a flue liner?

Often, yes. A liner protects an older chimney from heat and fumes and helps the stove draw. Your installer will inspect the chimney first. Fitted flexible liners run from £800 to £2,000, so ask for the liner to be priced as its own line.

Can I have a log burner if I have no chimney?

Yes, in many homes. A twin-wall insulated flue system is built through the ceiling or an outside wall and up above the roof. Published guides put a fitted system at £1,500 to £3,500, and the whole job costs more than fitting into an existing chimney.

How much does log burner installation cost?

In a home with a usable chimney, £1,900 to £3,500 is typical with the stove included. The wider range across published guides is £1,800 to £5,500. The flue, the hearth, scaffolding and the stove itself all change the total.

What does the stove itself cost?

Popular stoves cost £800 to £1,500. Cheaper stoves are available, and larger or designer models cost more. Ask your installer which stoves suit your room size and whether a model is approved for smoke control areas.

Find someone near you