chimneysweep.tradePost a job

Guide

Chimney fires: signs, causes and prevention

A chimney fire starts when soot or tar in the flue catches alight. See the signs, the causes, and how regular sweeping and dry fuel help.

Drawing of a chimney stack on a roof with a ladder against it

What a chimney fire is

A chimney fire happens when soot or tar built up in the flue catches alight. It can burn fiercely inside the chimney and can damage the flue and the brickwork. Heat can pass to nearby timbers and rooms.

Signs to look for

Some chimney fires are loud, with a roaring or rumbling noise from the chimney, thick smoke, and flames or sparks from the top of the stack. Others burn slowly and may only show as cracked or discoloured brickwork, or a strong smell from the chimney. If you see or hear a chimney fire, call 999.

What causes soot and tar to build up

Wet or unseasoned wood, slow smouldering fires, closing the air controls too far, and burning rubbish or painted wood all leave more deposits. A cool flue gathers more tar than a warm one. A blocked or damaged flue can also trap deposits.

In England, wood sold in volumes under two cubic metres has to be authorised wood, and the rules set the prohibited level of moisture at more than 20%. Using dry wood helps.

How to reduce the risk

Have the chimney swept as often as the fuel and use require. HETAS encourages at least twice a year for wood and at least once a year for smokeless fuels. Burn dry wood and the fuels your appliance is made for. Follow the maker's advice on air controls.

A smoke test or camera survey can find cracks and blockages. A bird guard or cowl helps keep nests out.

After a chimney fire

Do not use the chimney again until it has been swept and inspected. A sweep may suggest a camera survey, and a repair or liner if the flue is damaged. Tell your insurer, and keep the records.

Common questions

Can sweeping prevent a chimney fire?

Regular sweeping removes soot and tar, which are what burn in a chimney fire. It reduces the risk. A sweep can also point out cracks and blockages.

What should I do if I think I have a chimney fire?

Get everyone out and call 999. Afterwards have the chimney swept and inspected before it is used again.

Does burning wet wood cause chimney fires?

Wet wood burns cooler and leaves more tar and soot in the flue. Choosing dry wood helps. In England the rules treat wood above 20% moisture as above the prohibited level for wood sold in small volumes.

Where to go from here

Read next

Find a chimney sweep near you